IYS POX 040

Product Information

PRODUCT DESCRIPTION

IYS POX 040 is a two-component topcoat that can be applied with a roller. Its notable features include high surface hardness, resistance to water and chemicals, high mechanical strength, and ease of cleaning.

ADVANTAGES

  • Prevents dusting
  • Forms a hard film
  • Creates a seamless surface
  • Easy to clean, hygienic, and requires minimal maintenance over time
  • Easy to apply
  • Solvent-free

Product Description

 

APPLICATION AREAS

  • Factories
  • Warehouses
  • Shopping malls
  • Workshops
  • Aircraft hangars
  • Schools
  • Hospitals
  • Pharmaceutical industry
  • Chemical factories
  • Food industry
  • Laboratories
  • Parking lots
  • Treatment plants
  • Areas where heavy forklifts and corrosive chemicals are used

MIXING

IYS POX 040 is produced in ready-to-use sets according to the mixing ratios. Before application, the material temperature should be at least +15°C. Component A should be mixed with a mechanical mixer at 300-400 rpm using the appropriate mixing blade. Then, Component B (hardener) should be added and mixing should continue. Both components should be thoroughly mixed, ensuring the edges and bottom of the mixing container are well blended. Otherwise, unmixed A or B components may form a soft sticky film on the surface, causing incorrect application. A crucial point is that the mixer blade must touch the bottom of the container to minimize air intake and provide a healthier, problem-free surface. After mixing, transfer the mixture to another clean container and mix for 2-3 more minutes. Do not prepare more material than can be used within the mixture’s lifespan.

APPLICATION METHODS

IYS POX 040 should be applied with a roller or trowel. After starting the application, it is recommended to texture the surface using a spiked roller.

CONSUMPTION

IYS POX 040 has an average consumption of approximately 400-500 g/m² (200-225 µ dry film thickness), depending on surface roughness. Consumption may vary depending on the system chosen. For further information, you can consult the ELAPUR Technical Department.

INTERCOAT DRYING TIME

  • Between coats, allow 12-24 hours at 20°C.
  • For subsequent coats, the minimum waiting time is 24 hours, and the maximum is 48 hours.

PACKAGING

  • 24 kg set
    • Component A: 20 kg tin
    • Component B: 4 kg tin

STORAGE CONDITIONS

  • Store in a dry environment, protected from freezing, between +5°C and +30°C, in its original packaging.
  • Do not stack more than three pallets; avoid stacking pallets for long-term storage.
  • If stored under appropriate conditions, the product can be kept for up to 12 months from the production date.

PRODUCT INFORMATION SHEET

Contact Us