IYS POX 005

Product Information

PRODUCT DESCRIPTION

IYS POX 003 is an epoxy resin-based, two-component, solvent-free, high-filling capacity, economical surface primer.

APPLICATION AREAS

  • Prior to applications on surfaces such as concrete, asphalt, steel, wood, epoxy, polyurethane, and similar materials.
  • Before applying polyurethane surface coatings on asphalt and floors in outdoor environments.
  • As an adhesion promoter before using cement-based materials for coating and repair on old concrete surfaces.
  • Can be used as a primer to fill capillary cracks in concrete surfaces, surface hardener, and dustproofing agent.

Product Description

 

ADVANTAGES

  • Provides surface filling properties.
  • Ensures excellent adhesion of the topcoat to the surface.
  • Forms a hard film.
  • Solvent-free.
  • High mechanical strength.
  • Does not harbor bacteria.

PRE-APPLICATION PREPARATION

  • The surface must be free from any contaminants that could hinder adhesion.
  • Ensure the substrate is dry.
  • The surface temperature should be between +5°C and +30°C.
  • Slowly add Component B of IYS POX 005 to Component A while mixing with a 300 rpm mixer.
  • Continue mixing for approximately 4 minutes until a homogeneous mixture is achieved.

CONSUMPTION

IYS POX 005 has an average consumption of approximately 0.30–0.50 kg/m² at a theoretical thickness of 200 microns (depending on the roughness of the surface). The consumption may vary depending on the system chosen. For further information, you can consult the ELAPUR Technical Department.

INTERCOAT DRYING TIME

  • Between coats, allow 14-16 hours at 20°C.
  • For subsequent coats, the minimum waiting time is 24 hours, and the maximum is 48 hours.

PACKAGING

  • 20 kg set
    • Component A: 15.6 kg tin
    • Component B: 4.4 kg tin

STORAGE CONDITIONS

  • Store in a dry environment, protected from freezing, between +5°C and +30°C, in its original packaging.
  • Do not stack more than three pallets; avoid stacking pallets for long-term storage.
  • If stored under appropriate conditions, the product can be kept for up to 18 months from the production date.

TECHNICAL DATA SHEET

Contact Us