APPLICATION AREAS

• Local repairs on concrete, cement plaster, asbestos/cement, and metal surfaces,
• Resolving osmosis issues on sheet metal, wood, and particularly fiberglass boats,
• Repairing cracks and damaged areas in the substructure before self-leveling applications,
• Cooling towers and underground metal and concrete pipelines in power plants,
• Pipe joint areas,
• Restoration of historical buildings.

PRE-APPLICATION PREPARATION

• Ensure the surface is free from any dirt or contaminants that may hinder adhesion.
• Confirm the substrate is dry.
• Take necessary precautions to prevent water infiltration.
• The surface temperature must be between +5°C and +30°C.
• Slowly add Component B of EPOXAN 500 into Component A while mixing with a 300 rpm mixer.
• Continue mixing for approximately 4 minutes until a homogeneous mixture is achieved.

CONSUMPTION

• 1.65 kg/m² for a thickness of 1 mm.

APPLICATION METHOD

• EPOXAN 500 can be applied using a spatula, trowel, or filling cartridge gun.
• For pre-prepared holes, fill from the bottom up.
• Slowly rotate the anchoring rod of the specified dimensions into the filled hole until material is observed seeping out.
• For anchoring details such as hole diameter, rebar size, and consumption, consulting the ELAPUR Technical Department is recommended.

RECOMMENDATIONS AND WARNINGS

• For optimal results, ensure the ambient temperature is between +5°C and +30°C, and take precautions against adverse weather conditions.
• The material’s performance temperature ranges from -15°C to +90°C.
• Do not attempt to reuse hardened material by adding water or similar substances.
• After proper application, the next layer can typically be applied within 40 minutes.
• To achieve the specified performance and technical values without variations in processing and open times, ensure application in optimal ambient and substrate temperatures with appropriate humidity levels.
• Prepare stored packages for application at an average temperature of 25°C.
• Clean used tools and equipment with cellulose thinner or suitable solvents after application.

PACKAGING

• 10 kg set:
  • Component A: 5 kg tin
  • Component B: 5 kg tin

STORAGE CONDITIONS

• Store in a dry environment, protected from freezing, between +5°C and +30°C, in original packaging.
• Stack no more than three pallets; avoid stacking pallets for extended storage periods.
• If stored under appropriate conditions, the product can be used for up to 18 months from the production date.

TECHNICAL DATA SHEET